Royal Enfield Hunter 350 Black Centre Stand Assembly RAW00325/A
$30.00
👀 people are viewing this right now
🔥 sold in last 24 hours
⚠️ Only left in stock
Royal Enfield RAW00325A Centre Stand Hunter 350 is a replacement black centre stand assembly designed specifically for the Royal Enfield Hunter 350. Part No. RAW00325/A helps provide a stable support point when the motorcycle is parked and is suitable for replacing a worn or damaged centre stand assembly.
Key Features
- Brand: Royal Enfield
- Part Number: RAW00325/A
- Product Type: Centre Stand Assembly
- Compatible Model: Hunter 350
- Finish: Black
- Designed for stable motorcycle support while parked
- Suitable for replacement and restoration
- Part-number-specific fitment
- Verify compatibility before ordering
Got Questions?
Feel free to Get in touch 
GUARANTEED SAFE CHECKOUT
Your Payment is 100% Secure
Royal Enfield RAW00325/A Centre Stand Assembly – Hunter 350
Royal Enfield RAW00325A Centre Stand Hunter 350 is a replacement centre stand assembly designed specifically for the Royal Enfield Hunter 350. Part No. RAW00325/A provides a precise reference for owners looking to replace a worn, damaged, bent, or missing centre stand during regular maintenance, repair, or restoration work.
A motorcycle centre stand provides an additional support point when the bike is parked. It can be useful during routine inspection, cleaning, maintenance, chain-related work, and storage. When the original centre stand is damaged or no longer suitable for use, replacing the assembly with the correct part-number-specific component is important.
For this Dug Dug listing, the confirmed motorcycle application is Hunter 350. Always verify the part number and the mounting arrangement of your motorcycle before ordering.
Royal Enfield RAW00325A Centre Stand Hunter 350 – Product Overview
The Royal Enfield RAW00325A Centre Stand Hunter 350 is a black centre stand assembly identified by part number RAW00325/A.
The centre stand is mounted underneath the motorcycle and is designed to provide a stable support position when the bike is parked on a suitable surface. Unlike a side stand, the centre stand supports the motorcycle through a different mounting arrangement and is commonly used when a more upright parked position is required.
A damaged centre stand can affect the convenience of parking and maintenance. Bending, impact damage, excessive corrosion, or worn mounting areas can all be reasons to inspect the assembly.
Before replacing the centre stand, it is also important to inspect the associated mounting hardware and surrounding frame area. A new stand cannot correct a damaged mounting point or unrelated mechanical issue.
Hunter 350 Centre Stand for Replacement
The Royal Enfield Hunter 350 centre stand is intended to provide a practical support point when the motorcycle is stationary.
Owners may consider replacement when the original stand has suffered physical damage, does not move correctly, has excessive play, or has deteriorated through long-term use.
A centre stand can be particularly useful for:
- Parking the motorcycle in a stable upright position
- Carrying out routine cleaning
- Inspecting certain motorcycle components
- Performing maintenance work
- Long-term motorcycle storage
- Restoration projects
The exact procedure and suitability of using the centre stand for maintenance should always depend on the motorcycle’s service requirements and the stability of the surface.
Why Part Number RAW00325/A Matters
Motorcycle spare parts often have similar-looking alternatives, so the exact part number is an important identification reference.
For this product, the part number is:
RAW00325/A
For online searches, it may also appear as:
RAW00325A
Useful search variations include:
- Royal Enfield RAW00325A Centre Stand Hunter 350
- Royal Enfield RAW00325/A Centre Stand
- Hunter 350 Centre Stand Assembly
- Hunter 350 Centre Stand
- Royal Enfield Hunter 350 Black Centre Stand
- RAW00325A Hunter 350 Centre Stand
- Hunter 350 Stand Assembly
Using the part number together with the motorcycle model helps make the product identification more precise and reduces the chance of selecting a similar component for another application.
Royal Enfield RAW00325A Centre Stand Hunter 350 Compatibility
The confirmed application for this Dug Dug product is:
Royal Enfield Hunter 350
The Royal Enfield RAW00325A Centre Stand Hunter 350 should be matched with the motorcycle’s exact model and the existing mounting arrangement before purchase.
Centre stand assemblies can vary in dimensions, mounting points, spring arrangements, and overall design. For that reason, a stand should not be selected only because it appears similar in photographs.
Before ordering, compare:
- Motorcycle model
- Part number
- Stand shape
- Mounting points
- Related hardware
- Existing centre stand arrangement
If the motorcycle has been modified, lowered, or fitted with non-standard hardware, additional fitment checks may be necessary.
For more Royal Enfield motorcycle parts, visit the Royal Enfield spare parts.
Signs Your Hunter 350 Centre Stand May Need Replacement
A centre stand is a mechanical support component and should be inspected periodically.
Bent or Damaged Stand
A fall or impact can bend the stand or change its original shape. A visibly deformed stand should be inspected before continued use.
Excessive Play
Unusual movement around the mounting area can indicate wear in the stand, mounting hardware, or related components.
Difficult Movement
If the stand does not move smoothly between its stored and deployed positions, the mounting area and associated hardware should be checked.
Corrosion or Deterioration
Long-term exposure to moisture, road dirt, and other environmental conditions can affect the metal surface and mounting components.
Damaged Mounting Area
If the motorcycle has experienced an impact underneath the frame, the centre stand itself may not be the only component requiring inspection.
Benefits of Replacing a Damaged Centre Stand
Proper Support
A correctly installed centre stand provides the intended additional support when the motorcycle is parked.
Easier Maintenance
Using the centre stand can make certain cleaning, inspection, and maintenance activities more convenient.
Improved Usability
A properly functioning stand is easier to deploy, retract, and use during everyday motorcycle ownership.
Restoration Support
The correct replacement component can help restore a Hunter 350 that has damaged or missing stand hardware.
Part-Number Accuracy
Using RAW00325/A provides a specific reference when ordering the replacement.
Centre Stand vs Side Stand
The centre stand and side stand have different functions.
A side stand is generally used for quick everyday parking, while the centre stand supports the motorcycle in a more upright position.
A centre stand can be useful when cleaning the motorcycle or carrying out certain maintenance activities because it changes the way the bike is supported.
The Royal Enfield RAW00325A Centre Stand Hunter 350 is therefore intended specifically for the centre-stand mounting position and should not be confused with the Hunter 350 side stand assembly.
Related springs, stopper components, spindles, sleeves, or mounting hardware may be separate parts depending on the product configuration. Always confirm what is included in the package before ordering.
Installation Information
Installation of the Royal Enfield RAW00325A Centre Stand Hunter 350 should be performed using the appropriate service procedure.
Before installation, make sure the motorcycle is securely supported and cannot fall during the work.
Inspect the centre-stand mounting area for damage, corrosion, or deformation. If the motorcycle has been involved in an accident or impact, check the frame and related mounting points as well.
When installing the replacement stand, ensure that it is positioned correctly and that the relevant mounting hardware is properly installed.
If a spring or other related hardware is required for the installation, use the correct component specified for the motorcycle.
After installation, operate the stand several times while the motorcycle is safely supported. Check that it moves smoothly and returns to its intended position without unusual interference.
Make sure the stand does not contact the exhaust, frame, wheel, or other components during operation.
The motorcycle should be stable when supported on the centre stand.
Because the centre stand supports the motorcycle’s weight while parked, professional installation is recommended when you are unsure about the correct mounting procedure.
Product Specifications
| Specification | Details |
|---|---|
| Brand | Royal Enfield |
| Part Number | RAW00325/A |
| Search Format | RAW00325A |
| Product Type | Centre Stand Assembly |
| Compatible Model | Hunter 350 |
| Finish | Black |
| Application | Motorcycle parking support |
| Replacement Use | Repair, maintenance and restoration |
How to Check RAW00325/A Fitment
Before ordering a Royal Enfield RAW00325A Centre Stand Hunter 350, first confirm that your motorcycle is a Hunter 350.
Next, compare the part number RAW00325/A with your existing component or applicable parts documentation.
Then compare the stand’s mounting arrangement with the existing motorcycle.
Pay attention to the mounting points and related components. If the motorcycle has aftermarket modifications, the original fitment may have been changed.
The part number should remain the primary identification reference, while the physical appearance can be used as an additional check.
Maintaining Your Hunter 350 Centre Stand
Regular inspection can help identify centre-stand issues early.
Keep the mounting area reasonably clean and inspect the stand for corrosion, bends, cracks, unusual movement, or damage.
Check the mounting hardware periodically and make sure there is no excessive looseness.
The stand should move between its stored and deployed positions without abnormal resistance.
If unusual noise, excessive play, or instability develops, inspect the complete centre-stand mechanism before continuing to use it.
Do not use the centre stand on an unstable, loose, or unsuitable surface.
Royal Enfield RAW00325A Centre Stand Hunter 350 for Repair and Restoration
For Hunter 350 owners, a properly functioning centre stand can be useful for both everyday ownership and motorcycle maintenance.
A damaged stand may make parking and certain maintenance tasks less convenient. During restoration, replacing a bent or missing centre stand can also help return the motorcycle to a complete configuration.
The Royal Enfield RAW00325A Centre Stand Hunter 350 is identified by the specific RAW00325/A part number and is intended for the confirmed Hunter 350 application.
For more motorcycle spare parts, you can browse the Dug Dug Motorcycles collection.
Riders looking for motorcycle lighting and related riding accessories can visit the LIU HJG LED Store for LED headlights, fog lights, mobile holders, and other motorcycle accessories.
Important Checks Before Ordering
Before purchasing, confirm the following:
Motorcycle: Hunter 350
Part Number: RAW00325/A
Product: Centre Stand Assembly
Finish: Black
Also check whether the required mounting springs and other related components are already available on your motorcycle or are supplied separately.
If the existing mounting point is damaged or modified, the replacement centre stand may require additional inspection before installation.
FAQ
The Royal Enfield RAW00325A Centre Stand Hunter 350 is a replacement centre stand assembly identified by part number RAW00325/A for the compatible Hunter 350 motorcycle.
The part number is RAW00325/A, which may also be written as RAW00325A in online searches.
The confirmed application for this Dug Dug listing is the Royal Enfield Hunter 350.
A centre stand provides an additional support point when the motorcycle is parked and can make certain inspection, cleaning, maintenance, and storage tasks more convenient.
The included hardware can vary by product configuration. Check the actual product listing and package contents before ordering to confirm whether springs, bolts, spindles, or other related components are included.
Confirm that your motorcycle is a Hunter 350, match the existing part number with RAW00325/A, and compare the mounting arrangement before installation.
| Weight | 0.5 kg |
|---|---|
| Compatibility | Royal Enfield |
| Fitment | Hunter 350 |
Related products
AIR and Oil Filter Element combo for Royal Enfield Bullet 350, Classic 350, Electra, Thunderbird 350
BESTSELLERS
RECOMMENDED
Similar products on Dug Dug
AIR and Oil Filter Element combo for Royal Enfield Bullet 350, Classic 350, Electra, Thunderbird 350
CUSTOMER FEEDBACK
Product quality is beyond words. I saw more than 100 products, online offline. Some of them were three times the cost of mine. But none were as comfortable or as easy on the eye as this one. Service and customer care is above excellent. Dug Dug motorcycles replied to my every query and without any delay.
Immensely and deeply satisfied with the physical product and also with the service they offered me.
100% recommended.
Bought a RD350 handle bar for my RE Bullet 350. Quality wise good 👍. There was a big delay in response and the time to reach me. Other wise great and satisfied with the product purchased and dealer is genuine and can refer to anyone.🙏
I live in Thailand. I ordered two canvas saddle bags from my RE Classic 500. They arrived quickly (via FEDEX) and the customs fees were reasonable.
