Royal Enfield 570018/G Genuine Cylinder Gasket – Crankcase to Cylinder Barrel for Classic 350, Bullet Standard 350, Electra 350 & Thunderbird 350
$2.65
👀 people are viewing this right now
🔥 sold in last 24 hours
⚠️ Only left in stock
The Royal Enfield Cylinder Gasket for Classic 350 (Part No. 570018/G) is a replacement engine gasket designed for the joint between the crankcase and cylinder barrel. It helps create a proper seal between these engine components and prevent oil leakage when correctly installed. It is listed for the Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350.
Key Features
- Brand: Royal Enfield
- Part Number: 570018/G
- Product Type: Cylinder Gasket
- Application: Crankcase to Cylinder Barrel
- Compatibility: Classic 350, Bullet Standard 350, Electra 350, Thunderbird 350
- Fitment: Verify your motorcycle’s model year and engine variant before ordering.
Got Questions?
Feel free to Get in touch 
GUARANTEED SAFE CHECKOUT
Your Payment is 100% Secure
Royal Enfield Cylinder Gasket for Classic 350 – Crankcase to Cylinder Barrel (570018/G)
The Royal Enfield Cylinder Gasket for Classic 350 (Part No. 570018/G) is a replacement engine gasket designed for the connection between the crankcase and cylinder barrel. It helps create a proper seal between these engine components, reducing the possibility of oil leakage when correctly installed.
The cylinder gasket plays an important role in maintaining the sealing condition of a motorcycle engine. It sits between two mating engine surfaces and helps prevent oil from escaping through the joint during normal engine operation. Over time, exposure to engine heat, pressure, and vibration can affect the gasket’s condition, making replacement necessary during certain engine repairs and maintenance procedures.
The Royal Enfield Cylinder Gasket for Classic 350 is listed for the Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350. It carries part number 570018/G, which helps identify the correct replacement component when checking motorcycle compatibility.
Whether you are servicing your motorcycle or replacing a damaged engine gasket, verify the original part number, motorcycle model, production year, and engine variant before purchasing.
Key Features of Royal Enfield Cylinder Gasket for Classic 350
- Brand: Royal Enfield
- Part Number: 570018/G
- Product Type: Cylinder Gasket
- Application: Crankcase to Cylinder Barrel
- Compatibility: Classic 350, Bullet Standard 350, Electra 350, Thunderbird 350
- Purpose: Helps create a proper seal between the crankcase and cylinder barrel.
- Replacement Use: Suitable for compatible Royal Enfield engine servicing and gasket replacement.
- Fitment: Verify the exact engine specifications before ordering.
Product Specifications
| Specification | Details |
|---|---|
| Brand | Royal Enfield |
| Product Name | Cylinder Gasket |
| Part Number | 570018/G |
| Product Category | Motorcycle Engine Components |
| Gasket Application | Crankcase to Cylinder Barrel |
| Compatible Models | Classic 350, Bullet Standard 350, Electra 350, Thunderbird 350 |
| Vehicle Type | Royal Enfield Motorcycles |
| Fitment | Confirm model year and engine variant |
Royal Enfield Cylinder Gasket Compatibility
Choosing the correct cylinder gasket is important because gasket dimensions and designs can differ between motorcycle engines. The Royal Enfield Cylinder Gasket for Classic 350 is listed for the following motorcycle models.
1. Royal Enfield Classic 350
The gasket is listed for the Royal Enfield Classic 350. It is designed for the connection between the crankcase and cylinder barrel. If your existing gasket is damaged or showing signs of oil leakage, check whether part number 570018/G matches your motorcycle before ordering.
2. Royal Enfield Bullet Standard 350
Royal Enfield Bullet Standard 350 owners can consider this cylinder gasket as a replacement component when the original part number matches. Before purchasing, compare the required gasket specification with part number 570018/G to confirm compatibility with your motorcycle’s engine configuration.
3. Royal Enfield Electra 350
The Royal Enfield Electra 350 is also included in the supplied compatibility list. The Royal Enfield Cylinder Gasket for Classic 350 should only be selected for this model after verifying the original gasket number and engine specifications.
4. Royal Enfield Thunderbird 350
This cylinder gasket is also listed for the Royal Enfield Thunderbird 350. Check your motorcycle’s exact engine variant and original gasket part number before installation because fitment may vary between production versions.
Important compatibility note: The supplied product information lists Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350. Compatibility across every BS3, BS4, BS6, or UCE version has not been independently verified. Confirm the exact engine variant and part number before ordering.
What Is a Cylinder Gasket and Why Is It Important?
A cylinder gasket is an engine sealing component fitted between two mating engine surfaces. In this application, it is designed for the joint between the crankcase and cylinder barrel.
Its primary function is to help maintain a proper seal at the connection. This helps prevent unwanted oil leakage and supports the intended sealing of the engine assembly.
Because the gasket operates in an environment exposed to engine heat, pressure, and vibration, its condition is important. A damaged, incorrectly fitted, or deteriorated gasket may compromise the seal between the connected components.
The Royal Enfield Cylinder Gasket for Classic 350 is intended for compatible engine assemblies where this specific replacement gasket is required.
Signs Your Royal Enfield May Need a Cylinder Gasket Replacement
A cylinder gasket may require inspection or replacement if you notice any of the following symptoms:
1. Engine Oil Leakage
Oil appearing around the crankcase and cylinder barrel joint may indicate a sealing problem. However, leakage can also originate from nearby engine components, so the exact source should be identified before replacing the gasket.
2. Visible Gasket Damage
During engine servicing, a mechanic may identify cracks, deformation, deterioration, or other visible damage to the existing gasket.
3. Repeated Oil Seepage
If oil continues to appear around the engine joint after cleaning, the gasket and surrounding sealing surfaces should be inspected.
4. Leakage After Engine Servicing
If leakage develops after engine assembly or maintenance, incorrect gasket positioning, damaged sealing surfaces, or improper fastener tightening may be responsible.
These symptoms do not always confirm a cylinder gasket failure. A qualified mechanic should inspect the engine before replacement.
Benefits of Choosing the Correct Royal Enfield Cylinder Gasket for Classic 350
Helps Maintain Proper Engine Sealing
A correctly matched and installed gasket helps create a proper seal between the crankcase and cylinder barrel, reducing the possibility of leakage from the joint.
Supports Regular Engine Maintenance
Gasket replacement is an important part of certain engine repair and maintenance procedures. Using the correct component helps maintain the intended sealing arrangement.
Helps Reduce Oil Leakage
A suitable gasket, correctly installed on clean and undamaged mating surfaces, helps prevent oil from escaping through the connection.
Supports Correct Component Fitment
Using the correct Royal Enfield part number helps identify the required replacement gasket. Before purchasing the Royal Enfield Cylinder Gasket for Classic 350, compare part number 570018/G with your motorcycle’s original component.
Installation and Maintenance Tips
Cylinder gasket installation involves engine components and should be carried out carefully. Incorrect positioning or improper tightening may result in leakage or other engine problems.
Follow these general recommendations:
- Verify that part number 570018/G matches your motorcycle before installation.
- Inspect the crankcase and cylinder barrel mating surfaces.
- Clean the sealing surfaces according to the manufacturer’s service instructions.
- Check the new gasket for visible damage before fitting.
- Position the gasket correctly without forcing or stretching it.
- Follow the manufacturer’s recommended fastener-tightening sequence and torque specifications.
- Inspect the joint for leakage after engine assembly.
- Have the work completed by a qualified motorcycle mechanic if you are unfamiliar with engine servicing.
Avoid using additional sealant unless the manufacturer’s service instructions specifically recommend it.
Using the correct Royal Enfield Cylinder Gasket for Classic 350 and following the recommended installation procedure helps maintain the intended sealing condition of the engine assembly.
Buy Royal Enfield Cylinder Gasket for Classic 350 from Dug Dug Motorcycles
Looking for a Royal Enfield Cylinder Gasket for Classic 350? Part number 570018/G is a replacement engine gasket designed for the crankcase-to-cylinder-barrel connection.
This component is listed for the Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350. Before placing your order, verify your motorcycle’s production year, engine variant, and original part number to ensure correct compatibility.
At Dug Dug Motorcycles, you can check available Royal Enfield motorcycle spare parts and accessories for your maintenance and replacement requirements.
Visit Dug Dug Motorcycles to check available products.
You can also visit LIU HJG LED Store for motorcycle lighting products and accessories.
FAQ
The part number is 570018/G. Check this number against your motorcycle’s original component or confirm it with a Royal Enfield parts specialist before ordering.
The supplied compatibility list includes the Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350. Verify the exact model year and engine variant before purchase.
This gasket is designed for the connection between the crankcase and cylinder barrel. It helps maintain a proper seal between these engine components.
Oil leakage around the crankcase-to-cylinder-barrel joint, visible gasket damage, or repeated oil seepage may indicate a sealing problem. Have the engine inspected to identify the exact cause.
Universal compatibility across all BS3, BS4, BS6, and UCE versions should not be assumed. Confirm part number 570018/G against your motorcycle’s exact engine variant and production year.
Professional installation is recommended because fitting the gasket requires access to engine components. Correct surface preparation, gasket positioning, and fastener tightening are important for proper sealing.
| Compatibility | Royal Enfield |
|---|---|
| Fitment | Classic 350, Bullet Standard 350, Electra 350, Thunderbird 350 |
Related products
BESTSELLERS
RECOMMENDED
Similar products on Dug Dug
CUSTOMER FEEDBACK
Product quality is beyond words. I saw more than 100 products, online offline. Some of them were three times the cost of mine. But none were as comfortable or as easy on the eye as this one. Service and customer care is above excellent. Dug Dug motorcycles replied to my every query and without any delay.
Immensely and deeply satisfied with the physical product and also with the service they offered me.
100% recommended.
Bought a RD350 handle bar for my RE Bullet 350. Quality wise good 👍. There was a big delay in response and the time to reach me. Other wise great and satisfied with the product purchased and dealer is genuine and can refer to anyone.🙏
I live in Thailand. I ordered two canvas saddle bags from my RE Classic 500. They arrived quickly (via FEDEX) and the customs fees were reasonable.
