Royal Enfield 570192/C Genuine Cylinder Head Gasket for Classic 350, Bullet Standard 350, Electra 350 & Thunderbird 350
$11.65
👀 people are viewing this right now
🔥 sold in last 24 hours
⚠️ Only left in stock
The Royal Enfield Cylinder Head Gasket for Classic 350 (Part No. 570192/C) is an engine sealing component designed for compatible Royal Enfield motorcycles. It helps create a proper seal between the cylinder head and cylinder assembly when correctly installed. This gasket is listed for the Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350.
Key Features
- Brand: Royal Enfield
- Part Number: 570192/C
- Product Type: Cylinder Head Gasket
- Compatibility: Classic 350, Bullet Standard 350, Electra 350, Thunderbird 350
- Application: Cylinder head sealing
- Fitment: Verify your motorcycle’s model year and engine variant before ordering.
Got Questions?
Feel free to Get in touch 
GUARANTEED SAFE CHECKOUT
Your Payment is 100% Secure
Royal Enfield Cylinder Head Gasket for Classic 350 – Part No. 570192/C
The Royal Enfield Cylinder Head Gasket for Classic 350 (Part No. 570192/C) is an engine sealing component designed for compatible Royal Enfield motorcycles. It helps create a proper seal between the cylinder head and cylinder assembly, supporting the engine’s sealing system when correctly installed.
A cylinder head gasket is an important part of the engine assembly. It sits between the cylinder head and the cylinder, helping maintain a sealed connection during engine operation. Over time, exposure to engine heat, pressure, and repeated operating cycles can affect gasket condition. A damaged or incorrectly fitted gasket may lead to leakage or other engine sealing problems.
This Royal Enfield Cylinder Head Gasket is listed for the Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350. It carries part number 570192/C, which helps identify the replacement component when checking motorcycle compatibility.
If you are servicing your motorcycle or replacing an existing gasket, verify the original part number, model year, and engine variant before purchasing to ensure correct fitment.
Key Features of Royal Enfield Cylinder Head Gasket for Classic 350
- Brand: Royal Enfield
- Part Number: 570192/C
- Product Type: Cylinder Head Gasket
- Application: Cylinder head sealing
- Compatibility: Classic 350, Bullet Standard 350, Electra 350, Thunderbird 350
- Purpose: Helps maintain a proper seal between the cylinder head and cylinder assembly.
- Replacement Use: Suitable for compatible Royal Enfield engine servicing and gasket replacement.
- Fitment: Verify the exact engine specifications before ordering.
Product Specifications
| Specification | Details |
|---|---|
| Brand | Royal Enfield |
| Product Name | Cylinder Head Gasket |
| Part Number | 570192/C |
| Product Category | Motorcycle Engine Components |
| Component Type | Cylinder Head Gasket |
| Compatible Models | Classic 350, Bullet Standard 350, Electra 350, Thunderbird 350 |
| Vehicle Type | Royal Enfield Motorcycles |
| Fitment | Confirm model year and engine variant |
Royal Enfield Cylinder Head Gasket Compatibility
Choosing the correct cylinder head gasket is important because gasket designs and dimensions can vary between motorcycle engines. The Royal Enfield Cylinder Head Gasket for Classic 350 is listed for the following models.
1. Royal Enfield Classic 350
The gasket is listed for the Royal Enfield Classic 350. It is intended for the sealing connection between the cylinder head and cylinder assembly. If your existing gasket is damaged or requires replacement during engine servicing, check whether part number 570192/C matches your motorcycle.
2. Royal Enfield Bullet Standard 350
Royal Enfield Bullet Standard 350 owners can consider this cylinder head gasket when the original part number matches. Before ordering, compare the existing component and confirm the engine specifications to avoid incorrect fitment.
3. Royal Enfield Electra 350
The Royal Enfield Electra 350 is also included in the supplied compatibility list. Check your motorcycle’s production year and engine variant before purchasing, as gasket specifications may differ between versions.
4. Royal Enfield Thunderbird 350
This cylinder head gasket is also listed for the Royal Enfield Thunderbird 350. Verify the existing gasket part number and engine configuration before installation to ensure that part number 570192/C is suitable.
Important compatibility note: The supplied product information lists Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350. Compatibility across every BS3, BS4, BS6, or UCE version has not been independently verified. Confirm the exact engine variant and original part number before ordering.
What Is a Cylinder Head Gasket?
A cylinder head gasket is a sealing component fitted between the cylinder head and the cylinder assembly. Its purpose is to help maintain a sealed connection between these engine components.
The gasket supports the sealing requirements of the engine during operation. Depending on the engine design, it may also help contain combustion pressure and prevent the mixing of fluids between engine passages.
Because the cylinder head gasket operates under demanding engine conditions, its material and installation are important. Heat, pressure, incorrect tightening, and repeated engine operation can affect its condition.
The Royal Enfield Cylinder Head Gasket for Classic 350 is intended as a replacement component for compatible motorcycles requiring this specific gasket.2
Signs Your Royal Enfield May Need a Cylinder Head Gasket Replacement
A damaged cylinder head gasket can affect engine sealing. Some possible warning signs include:
1. Engine Oil or Fluid Leakage
Visible leakage around the cylinder head joint may indicate a sealing problem. However, leakage can also originate from nearby engine components, so the exact source should be identified before replacing the gasket.
2. Engine Overheating
Unusual engine temperature changes can sometimes be associated with gasket or other engine problems. Have the cooling and engine systems inspected to identify the cause.
3. Visible Gasket Damage
During engine servicing, a mechanic may identify cracks, deformation, deterioration, or other damage to the existing gasket.
4. Engine Performance Changes
Changes in engine performance may have several causes, including problems with engine sealing. A professional inspection is recommended before replacing any component.
These symptoms do not automatically confirm cylinder head gasket failure. A qualified mechanic should inspect the engine and diagnose the issue.
Benefits of Choosing the Correct Royal Enfield Cylinder Head Gasket for Classic 350
Helps Maintain Engine Sealing
A correctly matched and installed cylinder head gasket helps maintain the sealed connection between the cylinder head and cylinder assembly.
Supports Engine Maintenance
Gasket replacement may be necessary during certain engine repair and maintenance procedures. Using the correct component helps maintain the intended engine assembly.
Helps Prevent Leakage
A suitable gasket, correctly installed on clean and undamaged mating surfaces, helps prevent leakage through the cylinder head joint.
Supports Correct Component Fitment
Using the correct Royal Enfield part number helps identify the required replacement gasket. Before purchasing the Royal Enfield Cylinder Head Gasket for Classic 350, compare part number 570192/C with your motorcycle’s original component.
Installation and Maintenance Tips
Cylinder head gasket installation involves important engine components and should be completed carefully. Incorrect positioning or improper tightening may affect engine sealing.
Follow these general recommendations:
- Verify that part number 570192/C matches your motorcycle.
- Inspect the cylinder head and cylinder mating surfaces before installation.
- Clean the sealing surfaces according to the manufacturer’s service instructions.
- Check the new gasket for visible damage before fitting.
- Position the gasket correctly without forcing or stretching it.
- Follow the manufacturer’s recommended tightening sequence and torque specifications.
- Inspect the engine for leakage after assembly.
- Have the work completed by a qualified motorcycle mechanic if you are unfamiliar with engine servicing.
Avoid applying additional sealant unless the manufacturer’s service instructions specifically recommend it.
Using the correct Royal Enfield Cylinder Head Gasket for Classic 350 and following the recommended installation procedure helps maintain the intended sealing condition of the engine assembly.
Buy Royal Enfield Cylinder Head Gasket for Classic 350 from Dug Dug Motorcycles
Looking for a Royal Enfield Cylinder Head Gasket for Classic 350? Part number 570192/C is a replacement engine sealing component listed for the Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350.
Before placing your order, verify your motorcycle’s production year, engine variant, and original gasket part number to ensure correct compatibility.
Visit Dug Dug Motorcycles to check available Royal Enfield motorcycle spare parts and accessories for your maintenance and replacement requirements.
You can also visit LIU HJG LED Store for motorcycle lighting products and accessories.
FAQ
The part number is 570192/C. Check this number against your motorcycle’s original component or confirm it with a Royal Enfield parts specialist before ordering.
The supplied compatibility list includes the Classic 350, Bullet Standard 350, Electra 350, and Thunderbird 350. Verify the exact model year and engine variant before purchase.
This gasket is designed for the connection between the crankcase and cylinder barrel. It helps maintain a proper seal between these engine components.
Oil leakage around the crankcase-to-cylinder-barrel joint, visible gasket damage, or repeated oil seepage may indicate a sealing problem. Have the engine inspected to identify the exact cause.
Universal compatibility across all BS3, BS4, BS6, and UCE versions should not be assumed. Confirm part number 570018/G against your motorcycle’s exact engine variant and production year.
Professional installation is recommended because fitting the gasket requires access to engine components. Correct surface preparation, gasket positioning, and fastener tightening are important for proper sealing.
| Compatibility | Royal Enfield |
|---|---|
| Fitment | Classic 350, Bullet Standard 350, Electra 350, Thunderbird 350 |
Related products
AIR and Oil Filter Element combo for Royal Enfield Bullet 350, Classic 350, Electra, Thunderbird 350
BESTSELLERS
RECOMMENDED
Similar products on Dug Dug
CUSTOMER FEEDBACK
Product quality is beyond words. I saw more than 100 products, online offline. Some of them were three times the cost of mine. But none were as comfortable or as easy on the eye as this one. Service and customer care is above excellent. Dug Dug motorcycles replied to my every query and without any delay.
Immensely and deeply satisfied with the physical product and also with the service they offered me.
100% recommended.
Bought a RD350 handle bar for my RE Bullet 350. Quality wise good 👍. There was a big delay in response and the time to reach me. Other wise great and satisfied with the product purchased and dealer is genuine and can refer to anyone.🙏
I live in Thailand. I ordered two canvas saddle bags from my RE Classic 500. They arrived quickly (via FEDEX) and the customs fees were reasonable.
